Barrier Magstop

The Control Unit The ECOLINE control unit with microcontroller technology enables the barrier to be operated manually or automatically. There are 11 standard functions to be selected. The barrier either closes by the manual pulse command CLOSE, automatically after passage or in dependence on the connected safety equipment. The electronic braking guarantees optimum braking of the boom without bouncing or swinging out in the end positions. Besides the standard operating modes several special functions are additionally integrated. These enable the drive of warning lights and signal lamps. The storage of the activated opening pulses makes possible an automatic operation, i.e. the barrier remains open until all vehicles have passed. In case of power failure can be selected if the barrier shall start either after a manual reset, a signal reset or automatically. For safety reasons the manual reset function is factory-set. This means the barrier remains open as long as the reset button at the control unit is pressed manually. The electrical connection is carried out via the big and clear terminals for mains supply and control power. The motor is driven abrasion-free via TRIAC output stage. All signal inputs and relay outputs are optodecoupled. Simple adjustment of the operating mode and selection of the special functions by means of a rotary switch and DIP-switch. For the power supply of external devices, e.g. induction loop detectors 24 V DC / 0.5 A will be supplied.
barrier gates